skip to content link

Hot tub movers in Jackson, TN

MovePro moves hot tubs and spas in Jackson, TN, between homes, across a property, or into storage. A filled hot tub can weigh several thousand pounds and an empty one still weighs hundreds, carries no useful handholds, and is wide enough to make gates and corners the real obstacle. We move them with the right equipment and a route planned in advance, at a guaranteed price quoted before the date.

Get a Quote

What Has to Happen Before We Arrive

A hot tub move has a preparation stage that is not optional, and most of it is not our work. Read this part first, because a tub that is not ready on the day cannot be moved on the day.

The tub must be drained completely. That includes the pipework and the pump housing, not just the shell. Water left in the lines adds weight in unpredictable places and can freeze or leak in transit.

The power must be disconnected by an electrician. A hot tub is hard wired to a dedicated circuit in most installations. Disconnecting it is licensed electrical work and we do not perform it. Book that separately and have it done before our date.

Plumbing and any gas connection must be disconnected. Same principle. Those are trades, and we schedule around them rather than through them.

The cover and any steps come off. These travel separately and are easy to damage if they stay attached.

We will confirm all of this with you when you book, because the single most common reason a spa move has to be rescheduled is a tub that is still wired in.

Access Is the Whole Problem

Once the tub is empty and disconnected, the job becomes a question of geometry. A spa is typically between six and eight feet across, which is wider than a standard gate and wider than many side passages.

What we look at before quoting:

  • Gate widths and whether a fence panel needs to come down and go back up
  • The path from the tub’s position to where the truck can park
  • Steps, retaining walls, and changes of level
  • Overhead obstructions, including low branches and gutters
  • Decking the tub sits on, and whether it is built around the tub
  • Turning room for the truck itself

Jackson’s flat terrain is an advantage here. At around 410 feet of elevation with no significant grade, we are rarely moving a spa up or down a slope, which is the condition that makes these jobs genuinely difficult elsewhere. The constraint in Jackson is almost always the gate and the yard, not the hill.

A tub sunk into a deck, or one that was craned into place before a fence went up, is a different conversation. Some installations cannot be removed without dismantling something, and we will tell you that at the walkthrough rather than on the day.

How We Move It

The tub goes onto its side on a spa dolly, strapped and padded, and is walked along the planned route. The cover, steps, and any loose components travel separately and wrapped. At the destination it is set in its final position, which is worth deciding before we arrive, because repositioning a spa once it is placed is a second job rather than an adjustment.

We do not reconnect the tub. Wiring and plumbing at the new address are for your electrician and plumber, and we hand over with the tub in position and ready for them.

What Hot Tub Moving Costs in Jackson

We quote from a walkthrough and guarantee the price before the date. The figure comes from the size of the spa, the access at both ends including gates and level changes, the distance of the move, and whether a fence panel or decking has to be removed and reinstated.

We do not quote spa moves over the phone. Two tubs of identical size in two different back yards are two different jobs, and the yard is what sets the price.

If the hot tub is moving as part of a household move, it is quoted alongside our residential moving service and that is usually cheaper than a separate trip. If your new address is not ready, our storage service can hold it.

Ask about the military discount when you request your estimate, and mention a past customer or realtor referral.

MovePro movers using a loading ramp to load a truck outside a home

Hot Tub Moving Questions

Yes, completely, including the pipework and pump housing. A tub with water still in the lines cannot be moved safely.

No. A hard wired spa has to be disconnected by an electrician, and that is licensed work we do not perform. Have it done before our date.

Often, but not always. Most spas are wider than a standard gate, so a fence panel frequently has to come off and go back on. We check the gate width at the walkthrough and include that work in the quote where it is needed.

Sometimes. If the decking was built around the tub, something has to come apart first, and we will tell you what at the walkthrough rather than discovering it on the day.

We place it in its final position. Connecting the power, water, and any gas is for your electrician and plumber, so line those up for after our date.

Yes. Short moves within a property are routine, and they are still quoted from a walkthrough because the route is what sets the price.

MORE FAQs